This is a 2-spool, high-bypass turbofan. The high pressure spool (yellow, B) acts as a gas turbine generating a powerful jet of exhaust gas which drives the rotation of the low pressure spool (turquoise, A). The low pressure spool rotation aids compression for the turbine and rotates the fan, the fan provides additional thrust. The two spools, yellow and turquoise, spin at different speeds - the high pressure spool rotates significantly faster than the low pressure spool. High-bypass refers to the ratio of air volume which goes through the turbine compared to the volume which goes through only the fan - far more air travels through the fan than the turbine in a high-bypass engine. High-bypass turbofan engines provide good thrust at the higher sub-sonic speeds and low-bypass models can be used up to approximately Mach 1.6. At the highest speeds turbojet engines are more effective while turboprop engines are more effective at much slower speeds.
1. Nacelle
2. Fan
3. Low pressure compressor
4. High pressure compressor
5. Combustion chamber
6. High pressure turbine
7. Low pressure turbine
8. Core nozzle
برای به اشتراک گذاشتن – برای کپی، توزیع و انتقال اثر
تلفیق کردن – برای انطباق اثر
تحت شرایط زیر:
انتساب – شما باید اعتبار مربوطه را به دست آورید، پیوندی به مجوز ارائه دهید و نشان دهید که آیا تغییرات ایجاد شدهاند یا خیر. شما ممکن است این کار را به هر روش منطقی انجام دهید، اما نه به هر شیوهای که پیشنهاد میکند که مجوزدهنده از شما یا استفادهتان حمایت کند.
انتشار مشابه – اگر این اثر را تلفیق یا تبدیل میکنید، یا بر پایه آن اثری دیگر خلق میکنید، میبایست مشارکتهای خود را تحت مجوز یکسان یا مشابه با ا اصل آن توزیع کنید.
اجازهٔ کپی، پخش و/یا تغییر این سند تحت شرایط مجوز مستندات آزاد گنو، نسخهٔ ۱٫۲ یا هر نسخهٔ بعدتری که توسط بنیاد نرمافزار آزاد منتشر شده؛ بدون بخشهای ناوردا (نامتغیر)، متون روی جلد، و متون پشت جلد، اعطا میشود. یک کپی از مجوز در بخشی تحت عنوان مجوز مستندات آزاد گنو ضمیمه شده است.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
صفحهٔ اصلی توضیحات اینجابود. همهٔ نامهای کاربر زیر به en.wikipedia اشاره دارند.
2009-03-07 18:15 Zephyris 800×600× (1695257 bytes) {{Move to Commons}} {{Information |Description=An animation of a [[turbofan]] [[engine]], made in [[Blender (software)|Blender]], labels made in [[Inkscape]]. This is a 2-spool, high-bypass turbofan. The high pressure spool (yellow) acts as
{{BotMoveToCommons|en.wikipedia|year={{subst:CURRENTYEAR}}|month={{subst:CURRENTMONTHNAME}}|day={{subst:CURRENTDAY}}}} {{Information |Description={{en|An animation of a en:turbofanen:engine, made in Blender, labels